Woodpecker DTE Style Dental iLed Wireless Curing Light Lamp 1sec Cure 3200mW/c㎡
Introduction: 1.Technical specifications: 1.1Dimensions: 25mm×25mm×240mm 1.2 Net weight: 280g 1.3 Power source 1.3.1 Power supply: rechargeable Lithium battery 1.3.2 Battery mode: ICR 18490 1.3.3 Battery voltage and capacity: 3.7V/ 1400mAh,Battery has protection against Over-voltage, over-current and short circuit. 1.3.4 Adapter Power Input: 100V to 240V, 50Hz/60 Hz Input Power: 10VA Power Output: DC5V/1A 1.4 Light source: 1.4.1 5W high power blue light LED 1.4.2 Checking method: the LED light is fine when the light is on during operating correctly. 1.4.3 The wave length of this product can match with the clinical dental resin solidification, such as 3M, Dentspl etc. 1.4.4 Wave length: 440nm-480nm 1.5 Light intensity: P1 mode 2200-3200mW/cm2 P2 mode 1600mW/cm2~2200mW/cm2 P3 mode 1200mW/cm2~1600mW/cm2 2. Operation: 2.1 Press the mode button. Following two modes are available. 2.1.1 TURBO Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds.Its output light intensity is about 3200mW/cm2 2.1.2 NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5,10 ,15and 20 seconds.Its output light intensity is about 2200 mW/cm2 2.2 During the operation, put the disposable sleeve on the top of the main unit, aim the top at the correct position, press the ON/OFF button and the main unit will produce “Bi” sound, the curing light radiates blue light and starts working according to the set modes. Meanwhile, it starts counting down and will produce tone at every 5 seconds, it stops working when counting down to “0”. 2.3 During operation, the blue light can be stopped by press the power button at any time. 2.4 After a working cycle, operator can press the ON/OFF switch to start another working cycle. Stop operating if the equipment began to heat obviously, do not restart until the equipment cool down. Suggest continues working cycle less than 10 times. 2.5 Low power detective circuit is fixed inside of the main unit, when low power is detected, the display screen of main unit will wink, please charge in time. 2.6 When the battery needs to be charged, connect the plug of the adapter into the AC100V~240V power supply. Then connect the output plug of the adapter to the DC 5.0V input plug of the pedestal, and then the logo turn to blue. Put the main unit to the charging point of the pedestal, the display screen turn to scrolling display, and the curing lights starts charging. 2.7 After operating, take off the disposable sleeve and throw away, forbidden to reuse. 2.8 This equipment will turn off automatically if don’t any action within 2 minutes, turn it on by press any button. 2.9 The depth of solidification of composite is no less than 2mm per 1 second. Material:The handle is made of plastic,The lamp holder is made of metal FDA Statement:The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatry agencies.If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller name:sinodentalCity,State:SHENZHEN,ChinaTelephone number:0755-35590238
Dental Wireless LED Curing Light Lamp 1 Second to Cure 3200mW/c㎡
1.4.3 The wave length of this product can match with the clinical dental resin solidification, such as 3M, etc. 2.9 The depth of solidification of composite is no less than 2mm per 1 second. Then connect the output plug of the adapter to the DC 5.0V input plug of the pedestal, and then the logo turn to blue.
KaVo 15 C Straight Nose Cone Attachment
Autoclavable, internal water spray coolant. Made in Germany. Fit E-type motor.
Dental Implant Motor System Surgical Brushless/Ultrasonic Bone Cutter Motor
Motor: Original switzerland surgical brushless motor. 1X contra angle speed reducing handpiece for implant ( 55N ). Dental Piezo Surgery Bone Cutter ltrasonic Bone Piezosurgery. -Maximum torque is 80N.
Sklar Soak Instrument Detergent/Presoak 1 Gal. Jug Alcohol Scent Liquid 1 Count
Sklar Soakâ„¢ is intended to safely decontaminate soiled surgical instruments immediately after use. A ready to use, non-toxic formula for safe use on medical and surgical equipment including stainless steel, chrome, glass, plastic, Plexiglas, baked on painted surfaces. This solution is effective against H1N1, HIV-1, HSV, VRE, Rotaviruses, Hep B & C as well as TB, MRSA and A-Baumannii.
DeSoutter Medical Stencut R25-208 (5) Round Burs DIAMOND 4mm LONG EXP 2025-06-01
DeSoutter Medical Stencut R25-208 (5) Round Burs DIAMOND 4mm LONG EXP 2025-06-01 DESCRIPTION: Round Bur, DIAMOND, 4mm, LONG PART NO: R25-208 EXPIRATION: 2025-06-01 COUNTRY OF MANUFACTURE: United Kingdom What you see is what you get! !!!!!BUY with Confidence!!!!!! FOR PAYMENT: We accept PayPal or Any Guaranteed Issue FOR SHIPPING: Will ship throughout the Continental USA through Ground. Others pay extra or arrange your own shipping logistics. Winning Bidder pays for shipping unless noted as free shipping Will ship only to physical address. NO P.O. Box please. “The sale of this item may be subject to regulations by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are authorized purchaser. If this item is subject to FDA regulation, I will verify your status as an authorized purchase of this item before shipping of the item”
Aseptico AE-23 Autoclavable Irrigation Tubing Set AEU-7000 AEU-6000 Oral Surgery
Manufacturer: Aseptico Inc. (Made in USA). Tubing Material: High-grade surgical silicone (Autoclavable / Reusable). Fluid Intake: Integrated stainless steel IV/Saline bag spike.
Dental Heated Gutta Percha Cutter Tips Tooth Gum Cut Autoclaved 4pcs/pack AZDENT
Silicone Mat Blue for 20 instrument Autoclave Sterilization Cassette Tray
2 Packs Dental Heated Gutta Percha Cutter Tips Tooth Gum Cut Heating Autoclaved
For Gutta Percha Point Heating Cutter Tooth Gum.
